HPC-HB Cilindro Model
Floor model heater
Size: 14″w x 13 3/8″d x 39 3/4″h
Weight: 45 lbs.
Stone capacity: 180 lbs.
Kilowatt size: 6, 8, 9
The beautiful round shaped Cilindro has stones visible at the front side of the heater. Throw water on the top or the side. The heater is all stainless steel. Stainless elements run down the center for even heating. Cilindro is a great option for very soft and plentiful steam. It can be installed by a side wall or in the corner of the room. Controls built on the front side near the bottom. Not recommended for commercial use. Heat up time is 45 to 60 minutes.
Made in Finland.
| HEATER MODEL | Watts | Voltage & Phase | Min./Max. Cubic Ft. | AMPS | Main Breaker Size | Wire Size Breaker to Heater | CONTROLS | HEATER Ship LBS. | STONES Ship LBS. |
|---|---|---|---|---|---|---|---|---|---|
| HPC6-U1-HB | 6,000 | 240/1 | 141-294 | 25 | 30A | (2) #10 + G | ON HEATER | 44 | 180 |
| HPC8-U1-HB | 8,000 | 240/1 | 200-431 | 33.4 | 40A | (2) #8 + G | ON HEATER | 44 | 180 |
| HPC9-U1-HB | 9,000 | 240/1 | 282-494 | 37.5 | 40A | (2) #8 + G | ON HEATER | 44 | 180 |
Use double pole non-GFI type breaker
All supply wire to be 90°C copper
