HPC Cilindro model
Floor model heater
Size for HPC6/8/9: 14″w x 13 3/8″d x 39 3/4″h
Size for HPC11: 15 1/2″w x 15″d x 45 1/4″h
Weight for HPC6/8/9: 40 lbs.
Weight for HPC11: 50 lbs.
Stone capacity for HPC6/8/9: 180 lbs.
Stone capacity for HPC11: 270 lbs.
Kilowatt size: 6, 8, 9, 10.5
The stylish round shaped Cilindro has stones visible at the front side of the heater. Throw water on the top or the side. The heater is all stainless steel. Stainless elements run down the center for even heating. Cilindro is a great option for very soft and plentiful steam. It can be installed by a side wall or in the corner of the room. Heater works with digital or manual type control. Not recommended for commercial use. Heat up time is 45 to 60 minutes.
Made in Finland.
View Cilindro Manual for Digital CX30/CX45 Control (PDF)
View Cilindro Manual for Mechanical Control (PDF)
| HEATER MODEL | Watts | Voltage & Phase | Min./Max. Cubic Ft. | AMPS | Main Breaker Size | Wire Size Breaker to Sub-Panel | Sub-Panel Breaker | Wire Size Sub-Panel or Main Breaker to Power Unit | WIRE SIZE POWER UNIT TO HEATER | DIGITAL CONTROL OPTION | MANUAL CONTROL OPTION | Heater Ship Lbs. | Stones Ship Lbs. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HPC6-U1H | 6,000 | 240/1 | 141-354 | 25 | 30A | n/a | n/a | (2) #10+ N+G | (2) #10+ (2) #14+G | CX30 | F-2T & FX402 | 39 | 180 |
| HPC8-U1H | 8,000 | 240/1 | 200-431 | 33.4 | 40A | n/a | n/a | (2) #8+ N+G | (2) #8+ (2) #14+G | CX45 | F-2T & FX402 | 39 | 180 |
| HPC9-U1H | 9,000 | 240/1 | 282-494 | 37.5 | 50A | (2) #6+G N+G | (2) 30A | (4) #10+ N+G | (4) #10+ (2) #14+G | CX30 | F-2T & FX404 | 40 | 180 |
| HPC11-U1H | 10,500 | 240/1 | 317-636 | 43.75 | 50A | (2) #6+G N+G | (2) 40A | (4) #8+ N+G | (4) #8+ (2) #14+G | CX30 | F-2T & FX404 | 50 | 270 |
| HPC11-U3H | 10,500 | 208/3 | 317-636 | 29.2 | 40A | n/a | n/a | (3) #8+ N+G | (3) #8+ (2) #14+G | CX30 | F-2T & FX503 | 50 | 270 |
Use non-GFI type double pole breaker for 1 ph. or 3-pole for 3 ph.
All supply wire to be 90°C copper
