| |
All of our heaters have:
- Stainless steel elements for long life.
- Large rock capacity for heat storage.
- Direct rock contact with heating elements-necessary to filter
the harsh heat radiating from the 1400° F elements, to eliminate
the electo magnetic field for safe and therapeutic bathing: (the
bather feels only pleasant, soft heat) and to produce the best
steam when water is poured over them.
- Free airflow for faster heating.
- Maximum strength and durability from pressed metal design.
Finlandia and Harvia Sauna heaters have 3-wall construction for
cooler surface temperature and greater safety. All Finlandia and Harvia electric Sauna heaters are UL or ETL tested and listed.
 Model FLB
Wall mounted heater
Size: 16"w x 11"d x 24"h
Stone capacity: 45 lbs.
Built-in controls at bottom front of heater. 60 minute timer with 1 to 8 hr. delay timeclock allows Sauna to be preset up to 8 hrs. in advance. Controls can be side mounted upon request. FLB has long-lasting stainless steel elements and stainless interior. Welded unibody powder coated glossy enamel casing. Available in 3, 4.5, 6, and 8 KW sizes. Not for commercial use due to delay timer feature. Made in Finland.
View Heater Chart
View FLB Heater Manual
Model FIN
Wall mounted. Size: 16"w x 11"d x 24"h. Uses wall control and contactor
(if necessary). Stainless steel interior, top; glossy baked enamel
exterior. Available in 3, 4.5, 6, and 8 KW sizes. Made in Finland.
View Heater Chart
View FIN Manual for Mechanical Control
View FIN Manual for Digital CX170 Control
Stainless Option
Stainless steel--interior and exterior. Available in FLB and FIN
models. Recommended for commercial installations (health clubs,
hospitals, military installations, coastal areas with salty air,
etc.).
 Club Model
Floor model heater. Size: 19 7/8"w x 17"d x 27 1/2"h. The Club model heater replaces the FLC model floor heater. Club model uses Xenio digital control or manual wall control. It is entirely made of stainless steel with stainless steel elements for durability and long life. Ideal for large Saunas and commercial health clubs. Available in 10, 12.5, and 15 KW sizes. 135 lb. stone capacity. Made in Finland.
View Heater Chart
View Club Manual for Mechanical Control
View Club Manual for Digital CX30/CX45 Control
F-1T CONTROL
F2 CONTROL
|
F-2T
CONTROL
COVER 3
|
Finlandia Exterior Wall Mounted Controls
F-1T and F-2T controls include: thermostat, 60 min. timer, light switch, and
indicator light. F-2 control does not include a 60 min. timer and can be used
with a 24 hour time clock. For use with FIN and Club heater models. Controls
must be mounted within 6 feet of Sauna room. Made in U.S.A.
F-1T, 3 3/4"w x 3 1/2"d x 9 1/4"h.
For use with FIN-30, FIN-45, and FIN-60 heater models.
F-2T, 3 3/4"w x 2 1/2"d x 9 1/4"h.
For use with FIN-80, FIN 3ph heaters, and all Club model heaters.
F-2, 3 3/4"w x 2 1/2"d x 9 1/4"h.
For use with a separate 24 hour time clock in commercial settings when the Sauna is
to be on for an extended time. NOTE: The F-2 control can only be used
when an attendant is on duty during hours of operation.
COVER 3
Tamper resistant clear acrylic cover is ideal for fitness clubs. Screw on cover
encases the thermostat so that the Sauna room temperature cannot be adjusted by
others. Cover fits all F-series controls.
|
24HTC - 24 Hour Time Clock
For extended time in commercial settings
Size: 5"w x 3"d x 7 3/4"h
Surface mount
Use the 24HTC with the F-2 wall control and proper contactor in commercial settings where the Sauna will be on all day and shut off at night. NOTE: An attendant must be on duty during hours of operation.
CONTACTOR BOX
|
Finlandia
Contactors
Relay required for heaters 8 KW and over when F-2T or F-2 wall control is used. Made in U.S.A. All FX Contactor Boxes are 6"w x 8"h x 4"d.
FX402 (for 8kw, 240v/1ph heater)
FX303 (for 3ph heaters up to 8kw)
FX404 (for 240v/1ph Club heaters)
FX503 (for 208v/3ph Club heaters)
|
 Xenio Digital Wall Control
Surface or flush mount
Control pad size: 3 3/8"w x 1"d x 4 3/8"h
Power unit size CX170: 10 1/2"w x 3"d x 10 1/2"h
Power unit size CX30, CX45, CX30C: 14 1/4"w x 3"d x 10 1/2"h
Touch screen design. Adjusts time duration, temperature, and controls room light. Xenio has 60 min. timer plus 10 min. to 12 hour delay timer (10 min. increments). Has °F or °C display settings. Control pad, power unit, heat sensor with 13 feet of cable, and 16 foot long data cable included. CX30C has additional 16 foot long humidity sensor cable. All cables connect to the power unit. Longer cables (82 ft. max.) may be ordered. Not recommended for commercial use.
CX170-U1-15 Use with 240v/1ph FIN heaters and Club K10G-U1, K12.5G-U1, and K15G-U1 heaters.
CX30-U1-U3 Dual 240v/1ph and 208v/3ph power. Use with Club K10G-U1-NC, K10G-U3-NC, all Cilindro HPC, and all Virta HL heaters.
CX30C-U1 240v/1ph Virta Combi HLS heaters
CX45-U1-U3 Dual 240v/1ph and 208v/3ph power. Use with Club K12.5G-U1-NC, K12.5G-U3-NC, K15G-U1-NC, and K15G-U3-NC heaters.
View Xenio Components
View Xenio CX170 Manual
View Xenio CX30/CX45 Manual
View Xenio CX30C Manual
 Griffin Digital Wall Control
Surface mount
Control pad size: 3 5/8"w x 1"d x 4 1/2"h
Power unit size: 10 1/2"w x 3"d x 10 1/2"h
Push button design. Use with FIN or Club model heaters (for heaters with internal contactor). Adjusts time duration, temperature, and controls room light. Griffin has 60 min. timer plus 10 min. to 12 hour delay timer (10 min. increments). Has °F or °C display settings. Control pad, power unit, heat sensor with 13 feet of cable, and 16 foot long data cable included. All cables connect to the power unit. Longer cables (82 ft. max.) may be ordered.
CG170-U1-15 240v/1ph no longer available
CG170-U3-15 208/3ph FIN, Club heaters with internal contactor
View Components
View Griffin Manual
HPC Cilindro Model
Floor model heater
Size HPC7 & HPC9: 14"w x 13 3/8"d x 39 3/4"h
Size HPC11: 15 1/2"w x 15"d x 45 1/4"h
Stone capacity HPC7 & HPC9: 200 lbs.
Stone capacity HPC11: 265 lbs.
The beautiful round shaped Cilindro has stones visible at the front side of the heater. Throw water on the top or the side. The heater is all stainless steel. Stainless elements run down the center for even heating. Cilindro is a great option for very soft and plentiful steam. It can be installed by a side wall or in the corner of the room. Available in 3 sizes (240v/1ph only). Heater works with digital or manual type control. Not recommended for commercial use. Made in Finland.
View Heater Chart
View Cilindro Manual for Digital CX30 Control
View Cilindro Manual for Mechanical Control
 HL Virta Model
Floor model heater
Size HL7 & HL9: 16 3/8"w x 13 1/4"d x 33"h
Size HL11: 16 3/8"w x 16 3/8"d x 33"h
Stone capacity HL7 & HL9: 110 lbs.
Stone capacity HL11: 154 lbs.
The modern looking Virta heater is all stainless steel and has stainless elements. It is great for mid-sized saunas. Virta has a front panel that comes off for easy access to internal components for simple hook up. Elements are attached to a slide out tray and can be replaced without removing the stones from the heater. Available in 3 sizes (240v/1ph only). Heater works with digital or manual type control. Made in Finland.
View Heater Chart
View Virta Manual for Digital CX30 Control
View Virta Manual for Mechanical Control
 HLS Virta Combi Model (built-in steamer)
Floor model heater
Size HL7S & HL9S: 16 3/8"w x 16 1/8"d x 33"h
Size HL11S: 16 3/8"w x 19 1/8"d x 33"h
Stone capacity HL7S & HL9S: 110 lbs.
SStone capacity HL11S: 154 lbs.
The Virta Combi heater has a built-in 2.1 kW steam generator that creates a soft, pleasantly humid environment. Water tank holds 1.3 gal. and lasts about 2 hours. Refill manually via slot on top of the heater. Humidity can be adjusted from 20 to 95% rH. Heater comes with soapstone aroma holder cup. Virta Combi heater is all stainless steel with stainless elements. Front panel comes off for easy access to internal components. Elements are attached to a slide out tray and can be replaced without removing the stones from the heater. Available in 3 sizes (240v/1ph only). Heater uses Xenio CX30C-U1 control Made in Finland.
View Heater Chart
View Virta Combi Manual
 JM Model
Compact wall model heater
Size: 12"w x 9"d x 25"h
Stone capacity: 20 lbs.
The compact JM Sauna heater is a space saver in small rooms and is available in 120v and 240v versions. It has the only built-in heater fence in the industry. Unlike other heaters of its size, which are light weight, the compact JM has heavy-duty deluxe stainless steel construction for strength and durability. Other unique features are a lighted control panel at the top of the heater for easy and safe operation (it can be interchanged to left or right side of heater) and a removable bottom tray to catch excess water and prevent leakage to the floor. Available in 1.7 KW, 2 KW, and 3 KW sizes. JM-17 and JM-20 have a 1 hour timer with 1 to 8 hour delay feature. JM-30 has a 1 hour timer only. Made in Finland.
View
Heater Chart
View JM Heater Manual
KV-STAINLESS
|
KV Topclass Model
Lighted control panel near top of heater
Size: 18"w x 10"d x 25"h
Stone capacity: 45 lbs.
This top-of-the-line wall mounted heater is engineered for the 21st century. The lighted control panel built on the side of the heater is designed for simplicity and ease of use and it is reversible-left or right side. Control panel has 1 hour timer with a 1 to 8 hour time delay feature. With beautiful stainless steel construction and high tech design, the long lasting Topclass is the heaviest duty of any wall mounted heater in the industry. Available in 4.5, 6, and 8 KW sizes. Not recommended for commercial use due to delay timer feature. Made in Finland.
View Heater Chart
View KV Heater Manual
|
Comfort
Control Unit
This ultramodern control unit has an illuminated panel that lights
up when the heater is operating. All of the JM and KV heaters
have this built-in control.
 |
AF Ever Ready Forte Model
Instant heat floor model heater. Size: 19 3/4"w x 20 7/8"d x 34 5/8"h. The AF Forte model heater replaces the AV Ever Ready model. The newly redesigned Ever Ready Forte heater is ready to use at any time. Open the lid and you can pour water on the rocks immediately for abundant, soft steam. Heater stays in low power mode when not in use so it is ready to go for the next time. It is great for those who do not like to wait. Heater comes with digital waterproof touch pad control to be wall mounted inside the sauna room. The Ever Ready Forte comes in 4.4, 6.5, and 9.8 KW sizes. 225 lb. stone capacity. Made in Finland.
View Heater Chart
View AF Manual
|
Woodburning Sauna Stoves from Finland
Ideal for remote areas with no adequate electricity, the stove is manufactured by the largest woodburning Sauna stove factory in Finland. Woodburning stoves provide a very soft, soothing heat and a wonderful atmosphere. Stoves include an adaptor which converts metric pipe size to standard 6" pipe size. All Woodburning stoves must have proper ventilation. |
|
HARVIA M3
Size: 15 3/8"w x 17"d x 28"h
Color: Galvanized Metal-Black with Stainless
Cubic Feet min.-max.: 159-459
Weight: 100 lbs.
Stone capacity: 90 lbs
Location for smoke outlet: Top or back
Firewood max size: 6" diam. x 13 3/4" long
View Wood Stove Manual |
|
 |
HARVIA M3SL
(Exterior wood feed)
Size: 15 3/8"w x 17"d + 8 5/8"d collar x 28"h
Color: Galvanized Metal-Black
Cubic Feet min.-max.: 159-459
Weight: 110 lbs.
Stone capacity: 90 lbs
Location for smoke outlet: Top
Firewood max size: 6" diam. x 13 3/4" long |
|
|
HARVIA 20
Size: 17"w x 20 1/8"d x 30"h
Color: Galvanized Metal-Black with Stainless
Cubic Feet min.-max.: 282-706
Weight: 133 lbs.
Stone capacity: 90 lbs.
Location for smoke outlet: Top or back
Firewood max size: 6" diam. x 15 3/8" long
|
|
|
HARVIA 20 PREMIUM
Size: 17 1/2"w x 20 7/8"d x 30 3/4"h
Color: Stainless
Cubic Feet min.-max.: 282-706
Weight: 144 lbs.
Stone capacity: 90 lbs.
Location for smoke outlet: Top or back
Firewood max size: 6" diam. x 15 3/8" long
|
|
|
HARVIA 20ES
(Built-in water tank)
Size: 17"w x 25 5/8"d x 30"h
Color: Galvanized Metal-Black with Stainless
Water Tank: 5.28 gallons
Cubic Feet min.-max.: 282-706
Weight: 166 lbs.
Stone capacity: 90 lbs.
Location for smoke outlet: Top or back
Water tap location: Left or right side
Firewood max size: 6" diam. x 15 3/8" long
|
|
 |
HARVIA 20ESST
(Built-in water tank)
Size: 17"w x 25 5/8"d x 30"h
Color: Stainless
Water Tank: 5.28 gallons
Cubic Feet min.-max.: 282-706
Weight: 166 lbs.
Stone capacity: 90 lbs.
Location for smoke outlet: Top or back
Water tap location: Left or right side
Firewood max size: 6" diam. x 15 3/8" long |
|
|
HARVIA 20SL
(Exterior wood feed)
Size: 17"w x 20 1/8" + 8 5/8"d collar x 30"h
Color: Galvanized Metal-Black
Cubic Feet min.-max.: 282-706
Weight: 155 lbs.
Stone capacity: 90 lbs.
Location for smoke outlet: Top
Firewood max size: 6" diam. x 15 3/8" long
|
|
|
HARVIA 20DUO
(Adds Fireplace in Dressing Room)
Size: 17"w x 20 1/8" + 11"d collar x 30"h
Color: Stainless
Cubic Feet min.-max.: 282-706
Weight: 177 lbs.
Stone capacity: 90 lbs
Location for smoke outlet: Top
Firewood max size: 6" diam. x 15 3/8" long
|
|
|
HARVIA 26
Size: 17"w x 20 1/8"d x 32"h
Color: Galvanized Metal-Black with Stainless
Cubic Feet min.-max.: 353-918
Weight: 144 lbs.
Stone capacity: 135 lbs.
Location for smoke outlet: Top or back
Firewood max size: 6" diam. x 15 3/8" long
|
|
|
HARVIA 36
Size: 20 1/8"w x 20 1/8"d x 32"h
Color: Galvanized Metal-Black
Cubic Feet min.-max.: 494-1271
Weight: 155 lbs.
Stone capacity: 135 lbs.
Location for smoke outlet: Top or back
Firewood max size: 6" diam. x 15 3/8" long
|
|
 |
HARVIA 36DUO
(Adds Fireplace in Dressing Room)
Size: 20 1/8"w x 20 1/8"d + 8 5/8"d x 32"h
Color: Stainless
Cubic Feet min.-max.: 494-1272
Weight: 177 lbs.
Stone capacity: 135 lbs.
Location for smoke outlet: Top
Firewood max size: 6" diam. x 15 3/8" long |
|
 |
HARVIA 50
Size: 20 1/8"w x 28 3/8"d x 41 3/8"h
Color: Galvanized Metal-Black
Cubic Feet min.-max.: 706-1766
Weight: 353 lbs.
Stone capacity: 270 lbs.
Location for smoke outlet: Top or back
Firewood max size: 6" diam. x 24" long
View Harvia 50 Manual |
|
WOOD STOVE SURROUND
(FLOOR AND WALLS)
|
HARVIA WOOD STOVE SURROUND
Material: Aluminum-zinc coated steel
Walls weight: 69 lbs.
Floor weight: 21 lbs.
Wood stove surround allows for proper safety distances from wood stove to wooden surfaces without using tile or brick walls. The Surround greatly reduces the safety distance required from the wood stove to the benches from 19 3/4" to 4 1/2". Sold as 3 piece wall section. Floor bedding is sold separately. Adjustable leg levelers included.
WX17, Wall surround-3 piece: 22"w x 34"d x 40 1/2"h exterior dim.
WX18, Floor bedding: 18 1/2" w x 26 1/8" d x 2" h
View Surround Manual |
|
 |
WOOD STOVE PROTECTIVE SHIELDS
Material: Black painted steel
The protective shield decreases the safety distance from the stove to combustible materials. The shields attach directly to the stove and shape around it. Each heater model has its own specific shield. Shields can be purchased per piece or as a 3 piece set.
WL400 Single shield for M3 & M3SL: 18 7/8"w x 31 1/2"h
WL450 3 piece set for M3 & M3SL: 18" x 18 7/8" x 31 1/2"h
WL500 Single shield for 20, 20SL, & 20DUO: 22 1/2"w x 32 1/4"h
WL550 3 piece set for 20, 20SL, & 20DUO: 19 3/4" x 22 1/2" x 32 1/4"h
WL600 Single shield for 20ES: 28"w x 32 1/4"h
WL650 3 piece set for 20ES: 19 3/4" x 28" x 32 1/4"h
WL700 Single shield for 26: 22 1/2"w x 35 1/2"h
WL750 3 piece set for 26: 19 3/4" x 22 1/2" x 35 1/2"h
WL800 Single shield for 36 & 36DUO: 22 7/8"w x 35 1/2"h
WL850 3 piece set for 36 & 36DUO: 22 5/8" x 22 7/8" x 35 1/2"
View Protective Shield Manual |
|
|
PIPE MODEL WATER HEATER
WP220ST
Size: 14"w x 7 1/2"d x 16 1/8"h
Color: Stainless
Tank Size: 5.8 gal.
Weight: 16 lbs.
Mounts to all Harvia wood stoves
except the Harvia 50.
|
|
 |
HARVIA LEGEND 150
Size: 20 7/8"diam. x 29 1/8"h
Color: Galvanized Metal-Black
Cubic Feet min.-max.: 212-459
Weight: 128 lbs.
Stone capacity: 270 lbs.
Location for smoke outlet: Top or back
Firewood max size: 6" diam. x 13 3/4" long
View Legend Manual
|
|
 |
HARVIA LEGEND 150SL
(Exterior wood feed)
Size: 20 7/8"w x 20 7/8"d + 7 7/8"d collar x 29 1/8"h
Color: Galvanized Metal-Black
Cubic Feet min.-max.: 212-459
Weight: 137 lbs.
Stone capacity: 270 lbs.
Location for smoke outlet: Top
Firewood max size: 6" diam. x 13 3/4" long |
|
 |
HARVIA LEGEND 240
Size: 23 5/8"diam. x 32 3/4"h
Color: Galvanized Metal-Black
Cubic Feet min.-max.: 353-848
Weight: 166 lbs.
Stone capacity: 450 lbs.
Location for smoke outlet: Top or back
Firewood max size: 6" diam. x 15 3/8" long |
|
 |
HARVIA LEGEND 240SL
(Exterior wood feed)
Size: 23 5/8"w x 23 5/8"d + 7 1/8"d collar x 32 3/4"h
Color: Galvanized Metal-Black
Cubic Feet min.-max.: 353-848
Weight: 181 lbs.
Stone capacity: 450 lbs.
Location for smoke outlet: Top
Firewood max size: 6" diam. x 15 3/8" long |
|
 |
HARVIA LEGEND 240DUO
(Adds Fireplace in Dressing Room)
Size: 23 5/8"w x 23 5/8"d + 7 1/8"d x 32 3/4"h
Color: Galvanized Metal-Black
Cubic Feet min.-max.: 353-848
Weight: 210 lbs.
Stone capacity: 450 lbs.
Location for smoke outlet: Top
Firewood max size: 6" diam. x 15 3/8" long |
|
 |
HARVIA LEGEND 300
Size: 23 5/8"w x 26"d x 41"h
Color: Galvanized Metal-Black
Cubic Feet min.-max.: 495-989
Weight: 208 lbs.
Stone capacity: 585 lbs.
Location for smoke outlet: Top or back
Firewood max size: 6" diam. x 18 1/2" long |
|
 |
HARVIA LEGEND 300DUO
(Adds Fireplace in Dressing Room)
Size: 23 5/8"w x 26"d + 4 3/4"d x 41"h
Color: Galvanized Metal-Black
Cubic Feet min.-max.: 530-1060
Weight: 219 lbs.
Stone capacity: 585 lbs.
Location for smoke outlet: Top
Firewood max size: 6" diam. x 18 1/2" long |
|
 |
LEGEND SMOKE PIPE COVER
WL300
Size: 11 7/8"diam. x 22"h
Color: Black
Weight: 10lbs.
Stone capacity: 90 lbs.
The smoke pipe cover adds additional stone capacity to the Legend heater and reduces smoke pipe safety distance. It can be used on all Legend wood burning stoves. |
|
 |
LEGEND PROTECTIVE SHIELD & FLOOR BEDDING
Color: Black painted metal
Legend wood stoves can use 1 to 3 shields to protect desired sides. Shields cut the safety distances on protected sides by half. Suitable for all Legend wood stoves. The floor bedding is sold separately and is made of aluminum zinc coated steel.
WL200, Legend protective shield walls
Size: 20 1/2"w x 5" curved depth x 39 3/8"h
Weight: 15 lbs.
WL100, Legend protective floor bedding
Size: 18 1/2"w x 26 1/8"d x 2"h
Weight: 19 lbs.
View Legend Shield Manual |
|
 |
STEEL CHIMNEY
The Harvia stainless steel chimney kit is suitable for all Harvia wood stoves except the Harvia 50. The WHP1500 chimney kit comes with 1.5 m insulated chimney pipe, 1 m non-insulated stainless smoke pipe, clamps, lead through flange, lead through insulation with protector, rain flange kit, and rain cap. 1 m and .5 m chimney extensions may be ordered separately. Inside chimney height may be 3 m high unsupported and the outdoor corresponding self supported chimney height may be 2 m high.
WHP1500, Chimney kit
WHP500, Chimney pipe extension .5m (approx. 19 3/4")
WHP1000, Chimney pipe extension 1 m (approx. 39 3/8")
View WHP1500 Manual |
|
|
